The SmallRig Super Clamp review comes down to a simple question: do you need a compact way to attach a camera accessory to a suitable edge or support?
This aluminum alloy and stainless steel clamp has 1/4-inch and 3/8-inch threaded holes, with rubber pads intended to help protect the contact surface.
SmallRig Super Clamp Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsSmallRig Super Clamp
A compact clamp for camera creators who need to attach compatible gear to rods, shelves, or other surfaces within its jaw range.
- Adjustable jaw opens to about 40 mm and closes to about 15 mm; confirm the support thickness falls within this range.
- Includes 1/4-inch threaded holes and a 3/8-inch threaded hole for attaching compatible accessories.
- Designed for mounting on suitable objects such as hooks, shelves, plate glass, crossbars, and other clamps.
- Rubber pads on the clamp contact areas are intended to help prevent slipping and scratching.
Pros
- The 15–40 mm jaw range gives buyers a clear way to check whether a support will fit.
- Two thread sizes broaden the choice of compatible mounting accessories.
Consider before buying
- The clamp alone does not provide an articulating arm or ballhead, so achieving a particular camera angle may require additional hardware.
- Its jaw range limits the surfaces it can grip; measure the support before choosing it.
Read the full review summary
This is a straightforward mounting clamp rather than a complete articulating arm. Its jaw adjusts from about 15 mm to 40 mm, and its threaded holes let you connect compatible accessories such as a ballhead or magic arm.
That combination can help build a flexible camera or lighting setup around supports that fit the jaw.
The design may suit creators who already own compatible mounting hardware and want a compact base that can be repositioned between suitable surfaces.
Before buying, check both the thickness of the intended support and the connection required by your accessory; the clamp itself does not include an articulated arm or ballhead.
The buying factors
SmallRig Super Clamp Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Mounting flexibility
The clamp is described for a range of surfaces and has both 1/4-inch and 3/8-inch threaded holes for accessory connections.
Jaw range
The stated 15–40 mm opening covers many compact supports, though buyers must measure their mounting surface.
Accessory compatibility
The thread options support compatible accessories, but the right adapter or arm may need to be purchased separately.
Contact protection
Rubber pads are designed to help reduce slipping and scratching where the clamp meets a surface.
Build materials
Aluminum alloy and stainless steel are practical materials for a reusable camera mounting accessory.
Ready-to-use kit
The package includes one clamp, so a complete setup depends on compatible gear the buyer already has or obtains separately.
Key Features and Specifications of SmallRig Super Clamp
- Adjustable jaw opens to about 40 mm and closes to about 15 mm; confirm the support thickness falls within this range.
- Includes 1/4-inch threaded holes and a 3/8-inch threaded hole for attaching compatible accessories.
- Designed for mounting on suitable objects such as hooks, shelves, plate glass, crossbars, and other clamps.
- Rubber pads on the clamp contact areas are intended to help prevent slipping and scratching.
- Constructed from aluminum alloy and stainless steel.
- Compact, lightweight format, with a listed item weight of 0.13 kg.
- Package includes one super clamp; compatible arms, ballheads, and other accessories are not listed as included.
Pros and Cons of SmallRig Super Clamp
Pros
- The 15–40 mm jaw range gives buyers a clear way to check whether a support will fit.
- Two thread sizes broaden the choice of compatible mounting accessories.
- Rubber contact pads are a useful detail when clamping onto surfaces that could be marked.
- Aluminum alloy and stainless steel construction suits a reusable rigging accessory.
Consider before buying
- The clamp alone does not provide an articulating arm or ballhead, so achieving a particular camera angle may require additional hardware.
- Its jaw range limits the surfaces it can grip; measure the support before choosing it.
- Only one clamp is included, so multi-point mounting requires additional equipment.
Who Should Buy SmallRig Super Clamp?
Good fit
Consider this clamp if you need a compact attachment point for compatible camera or lighting accessories and your intended support measures between about 15 mm and 40 mm thick.
The 1/4-inch and 3/8-inch threaded holes provide options for building onto a setup you already use.
It is most compelling for buyers who have a specific mounting surface and accessory in mind.
Check the accessory’s thread and whether it needs an arm or ballhead between it and the clamp; those pieces are not included in the described package.
Who should skip it
Skip it if the mounting surface is outside the stated jaw range or if you need a complete adjustable arm in the same package.
This clamp supplies the base attachment point, so a different configuration may be more convenient when you need angle adjustment immediately.
How the SmallRig Super Clamp Fits a Camera Rig
Measure the support first
The jaw opening is the key compatibility limit: it adjusts from about 15 mm to 40 mm.
Measure the part you plan to grip, including any irregularity at the contact point, before relying on the clamp for a particular setup.
Plan the accessory connection
The 1/4-inch and 3/8-inch threaded holes make the clamp a mounting base for compatible gear.
If the accessory needs positioning away from the support or needs to rotate, check whether you already have a suitable arm or ballhead, since neither is included in the one-clamp package.
Consider the contact surface
Rubber pads are intended to help prevent slipping and scratching. That can be useful on finished surfaces, but buyers should still check that the surface is suitable for clamping and that the clamp sits securely before attaching equipment.
Keep the setup proportionate
The supplied product information gives a maximum weight recommendation of 3.3 pounds.
Treat that as a stated ceiling rather than a promise about every mounting arrangement: the accessory, support, angle, and connection hardware all affect how a complete rig behaves.
Alternatives to SmallRig Super Clamp
Camera Mounts & Clamps alternative

3,000+ ratings
Read Amazon ReviewsSmallRig 9.8-Inch Magic Arm Clamp Kit
Choose the main clamp if you already have the arm or ballhead you need and want a compact base.
The kit is a better fit if you want an included arm and more jaw range for positioning an accessory.
- This kit includes a super clamp and a 9.8-inch articulating arm with 1/4-inch screws at both ends.
- Its clamp jaw is described as opening from 15 mm to 54 mm, and the arm uses double ball heads for angle adjustment.
- The SmallRig Super Clamp is a standalone clamp with 1/4-inch and 3/8-inch threaded holes; it does not include an articulating arm.
Camera Mounts & Clamps alternative

8,000+ ratings
Read Amazon ReviewsSmallRig Double Ball Head Super Clamp Mount
The main clamp suits buyers who want a basic mounting point and prefer to choose separate accessories. Consider this combined mount if you need integrated angle adjustment and an included action camera adapter.
- This mount combines a clamp with a double ball head and includes an action camera mount adapter.
- Its clamp is described for rods, tubes, tables, and frames, and it supports up to 1.5 kg.
- The SmallRig Super Clamp offers threaded accessory holes, but its package is described as one clamp without a ballhead or action camera adapter.
Is SmallRig Super Clamp Worth It?
The SmallRig Super Clamp is worth considering when you need a compact, adaptable mounting base, already have compatible accessories, and can confirm that the support fits its 15–40 mm jaw range.
Its threaded holes, rubber pads, and metal construction make it a useful building block for a camera rig.
Buy it for the clamp function itself, not as a complete positioning kit: the package includes one clamp, while an arm or ballhead must be handled separately if your setup needs one.
Measure the support and verify the accessory connection before deciding.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsSmallRig Super Clamp
A compact clamp for camera creators who need to attach compatible gear to rods, shelves, or other surfaces within its jaw range.
- Adjustable jaw opens to about 40 mm and closes to about 15 mm; confirm the support thickness falls within this range.
- Includes 1/4-inch threaded holes and a 3/8-inch threaded hole for attaching compatible accessories.
- Designed for mounting on suitable objects such as hooks, shelves, plate glass, crossbars, and other clamps.
- Rubber pads on the clamp contact areas are intended to help prevent slipping and scratching.